-- BAY TECHNICAL ASSOCIATES (BAYTECH) MIB

-- Copyright (c) Bay Technical Associates 2003.
-- $Id: rs2.mib,v 1.3 2004/03/01 11:11:08 devel Exp $

-- Title: BAYTECH MIB for RS2 devices

-- *************************************************************************
-- ************************************************************************
-- Baytech-MIB { iso org(3) dod(6) internet(1) private(4)
--    enterprises(1) baytech(4779) }
--

Baytech-MIB DEFINITIONS ::= BEGIN

IMPORTS
   enterprises, IpAddress, Gauge, TimeTicks     FROM RFC1155-SMI
   DisplayString                                FROM RFC1213-MIB
   OBJECT-TYPE                                  FROM RFC-1212
   TRAP-TYPE                                    FROM RFC-1215;


	baytech		OBJECT IDENTIFIER ::= { enterprises 4779 }
	resseries	OBJECT IDENTIFIER ::= { baytech 4 }
	res2		OBJECT IDENTIFIER ::= { resseries 1 }
	res2p2		OBJECT IDENTIFIER ::= { resseries 2 }
	rs2		OBJECT IDENTIFIER ::= { resseries 3 }
	rs4		OBJECT IDENTIFIER ::= { resseries 4 }
	rs2system	OBJECT IDENTIFIER ::= { rs2 1 }
	rs2serial	OBJECT IDENTIFIER ::= { rs2 2 }
	rs2power	OBJECT IDENTIFIER ::= { rs2 3 }


	-- the rs2 system information

	-- the rs2 serial information

	-- the rs2 RPC information

	rs2PowerCntrlNumber OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of attached RPCs."
		::= { rs2power 1 }

	rs2PowerCntrlTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2PowerCntrlEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of RPC information."
		::= { rs2power 2 }

	rs2PowerCntrlEntry OBJECT-TYPE
		SYNTAX RS2PowerCntrlEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of RPC information."
		INDEX { rs2CntrlIndex }
		::= { rs2PowerCntrlTable 1 }

	RS2PowerCntrlEntry ::=
		SEQUENCE {
			rs2CntrlIndex				INTEGER,
			rs2CntrlState				INTEGER,
			rs2CntrlModelName			DisplayString,
			rs2CntrlName				DisplayString,
			rs2CntrlFirmwareVersion			DisplayString,
			rs2CntrlNumberOfOutlets			INTEGER,
			rs2CntrlNumberOfCurrentSensors		INTEGER,
			rs2CntrlNumberOfVoltageSensors		INTEGER,
			rs2CntrlNumberOfPowerSensors		INTEGER,
			rs2CntrlNumberOfTemperatureSensors	INTEGER,
			rs2CntrlNumberOfCircuitBreakers		INTEGER,
			rs2CntrlTotalCurrent			INTEGER,
			rs2CntrlMaxTotalCurrent			INTEGER,
			rs2CntrlTotalPower			INTEGER
		}

	rs2CntrlIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index into the RPC information table."
		::= { rs2PowerCntrlEntry 1 }

	rs2CntrlState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The overall state relative to the thresholds." 
		::= { rs2PowerCntrlEntry 2 }

	rs2CntrlModelName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The model name of this RPC."
		::= { rs2PowerCntrlEntry 3 }

	rs2CntrlName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..12))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The name of this RPC."
		::= { rs2PowerCntrlEntry 4 }

	rs2CntrlFirmwareVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The firmware version of this RPC."
		::= { rs2PowerCntrlEntry 5 }

	rs2CntrlNumberOfOutlets OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Number of controllable outlets on this RPC."
		::= { rs2PowerCntrlEntry 6 }

	rs2CntrlNumberOfCurrentSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of current sensors installed in this RPC."
		::= { rs2PowerCntrlEntry 7 }

	rs2CntrlNumberOfVoltageSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of voltage sensors installed in this RPC."
		::= { rs2PowerCntrlEntry 8 }

	rs2CntrlNumberOfPowerSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of power calculations for this RPC."
		::= { rs2PowerCntrlEntry 9 }

	rs2CntrlNumberOfTemperatureSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of temperature sensors installed in this RPC."
		::= { rs2PowerCntrlEntry 10 }

	rs2CntrlNumberOfCircuitBreakers OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of circuit breakers installed in this RPC."
		::= { rs2PowerCntrlEntry 11 }

	rs2CntrlTotalCurrent OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total current of all current sensors in this RPC."
		::= { rs2PowerCntrlEntry 12 }

	rs2CntrlMaxTotalCurrent OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total maximum detected current of all current sensors in this RPC."
		::= { rs2PowerCntrlEntry 13 }

	rs2CntrlTotalPower OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total power of all power sensors in this RPC."
		::= { rs2PowerCntrlEntry 14 }

	rs2OutletTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2OutletEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of controllable RPC outlets."
		::= { rs2power 3 }

	rs2OutletEntry OBJECT-TYPE
		SYNTAX RS2OutletEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of controllable RPC outlets."
		INDEX { rs2OutletRPCIndex, rs2OutletIndex }
		::= { rs2OutletTable 1 }

	RS2OutletEntry ::=
		SEQUENCE {
			rs2OutletRPCIndex	INTEGER,
			rs2OutletIndex		INTEGER,
			rs2OutletState		INTEGER,
			rs2OutletName		DisplayString
		}

	rs2OutletRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2OutletEntry 1 }

	rs2OutletIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the outlet."
		::= { rs2OutletEntry 2 }

	rs2OutletState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			reboot(2),
			lockon(3),
			lockoff(4),
			unlock(5),
			unknown(6)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
 			"Getting this variable will return the state of the outlet;
  			setting this variable will set the state of the outlet."
		::= { rs2OutletEntry 3 }

	rs2OutletName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..12))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The name of the outlet."
		::= { rs2OutletEntry 4 }

	rs2AllOutletsTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2AllOutletsEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table to control all RPC outlets."
		::= { rs2power 4 }

	rs2AllOutletsEntry OBJECT-TYPE
		SYNTAX RS2AllOutletsEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry to control all RPC outlets."
		INDEX { rs2AllOutletsRPCIndex }
		::= { rs2AllOutletsTable 1 }

	RS2AllOutletsEntry ::=
		SEQUENCE {
			rs2AllOutletsRPCIndex	INTEGER,
			rs2AllOutletsState	INTEGER,
			rs2AllOutletsStatus	DisplayString
		}

	rs2AllOutletsRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2AllOutletsEntry 1 }


	rs2AllOutletsState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			reboot(2),
			none(3)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Turns all outlets on, off or reboot."
		::= { rs2AllOutletsEntry 2 }

	rs2AllOutletsStatus OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Reports status of outlets in a comma delimitated string (0 = off; 1 = on; 2 = reboot; 3 = locked on; 4 = locked off)."
		::= { rs2AllOutletsEntry 3 }

	rs2CurrentTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2CurrentEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of current values."
		::= { rs2power 5 }

	rs2CurrentEntry OBJECT-TYPE
		SYNTAX RS2CurrentEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of current values."
		INDEX { rs2CurrentRPCIndex, rs2CurrentIndex }
		::= { rs2CurrentTable 1 }

	RS2CurrentEntry ::=
		SEQUENCE {
			rs2CurrentRPCIndex	INTEGER,
			rs2CurrentIndex		INTEGER,
			rs2CurrentValue		INTEGER,
			rs2CurrentMaxValue	INTEGER,
			rs2CurrentState		INTEGER,
			rs2CurrentHighCriticl	INTEGER,
			rs2CurrentHighWarning	INTEGER,
			rs2CurrentLowWarning	INTEGER,
			rs2CurrentLowCritical	INTEGER,
			rs2CurrentRearm		INTEGER
		}

	rs2CurrentRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2CurrentEntry 1 }

	rs2CurrentIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the current sensor."
		::= { rs2CurrentEntry 2 }

	rs2CurrentValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current reading for this RPC sensor."
		::= { rs2CurrentEntry 3 }

	rs2CurrentMaxValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The maximum detected current reading for this RPC sensor."
		::= { rs2CurrentEntry 4 }

	rs2CurrentState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current state relative to the thresholds."
		::= { rs2CurrentEntry 5 }

	rs2CurrentHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current high critical threshold."
		::= { rs2CurrentEntry 6 }

	rs2CurrentHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current high warning threshold."
		::= { rs2CurrentEntry 7 }

	rs2CurrentLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current low warning threshold."
		::= { rs2CurrentEntry 8 }

	rs2CurrentLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current low critical threshold."
		::= { rs2CurrentEntry 9 }

	rs2CurrentRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current rearm value."
		::= { rs2CurrentEntry 10 }

	rs2VoltageTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2VoltageEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of voltage values."
		::= { rs2power 6 }

	rs2VoltageEntry OBJECT-TYPE
		SYNTAX RS2VoltageEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of voltage values."
		INDEX { rs2VoltageRPCIndex, rs2VoltageIndex }
		::= { rs2VoltageTable 1 }

	RS2VoltageEntry ::=
		SEQUENCE {
			rs2VoltageRPCIndex	INTEGER,
			rs2VoltageIndex		INTEGER,
			rs2VoltageValue		INTEGER,
			rs2VoltageState		INTEGER,
			rs2VoltageHighCritical	INTEGER,
			rs2VoltageHighWarning	INTEGER,
			rs2VoltageLowWarning	INTEGER,
			rs2VoltageLowCritical	INTEGER,
			rs2VoltageRearm		INTEGER
		}

	rs2VoltageRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2VoltageEntry 1 }

	rs2VoltageIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the voltage sensor."
		::= { rs2VoltageEntry 2 }

	rs2VoltageValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The voltage reading for this RPC sensor."
		::= { rs2VoltageEntry 3 }

	rs2VoltageState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The voltage state relative to the thresholds."
		::= { rs2VoltageEntry 4 }

	rs2VoltageHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage high critical threshold."
		::= { rs2VoltageEntry 5 }

	rs2VoltageHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage high warning threshold."
		::= { rs2VoltageEntry 6 }

	rs2VoltageLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage low warning threshold."
		::= { rs2VoltageEntry 7 }

	rs2VoltageLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage low critical threshold."
		::= { rs2VoltageEntry 8 }

	rs2VoltageRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage rearm value."
		::= { rs2VoltageEntry 9 }

	rs2PowerTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2PowerEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of power values."
		::= { rs2power 7 }

	rs2PowerEntry OBJECT-TYPE
		SYNTAX RS2PowerEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of power values."
		INDEX { rs2PowerRPCIndex, rs2PowerIndex }
		::= { rs2PowerTable 1 }

	RS2PowerEntry ::=
		SEQUENCE {
			rs2PowerRPCIndex	INTEGER,
			rs2PowerIndex		INTEGER,
			rs2PowerValue		INTEGER,
			rs2PowerState		INTEGER,
			rs2PowerHighCritical	INTEGER,
			rs2PowerHighWarning	INTEGER,
			rs2PowerLowWarning	INTEGER,
			rs2PowerLowCritical	INTEGER,
			rs2PowerRearm		INTEGER
		}

	rs2PowerRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2PowerEntry 1 }

	rs2PowerIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the power sensor."
		::= { rs2PowerEntry 2 }

	rs2PowerValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The power reading for this RPC sensor."
		::= { rs2PowerEntry 3 }

	rs2PowerState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The power state relative to the thresholds."
		::= { rs2PowerEntry 4 }

	rs2PowerHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power high critical threshold."
		::= { rs2PowerEntry 5 }

	rs2PowerHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power high warning threshold."
		::= { rs2PowerEntry 6 }

	rs2PowerLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power low warning threshold."
		::= { rs2PowerEntry 7 }

	rs2PowerLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power low critical threshold."
		::= { rs2PowerEntry 8 }

	rs2PowerRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power rearm value."
		::= { rs2PowerEntry 9 }

	rs2TemperatureTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2TemperatureEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of temperature values."
		::= { rs2power 8 }

	rs2TemperatureEntry OBJECT-TYPE
		SYNTAX RS2TemperatureEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of temperature values."
		INDEX { rs2TemperatureRPCIndex, rs2TemperatureIndex }
		::= { rs2TemperatureTable 1 }

	RS2TemperatureEntry ::=
		SEQUENCE {
			rs2TemperatureRPCIndex		INTEGER,
			rs2TemperatureIndex		INTEGER,
			rs2TemperatureValue		INTEGER,
			rs2TemperatureState		INTEGER,
			rs2TemperatureHighCritical	INTEGER,
			rs2TemperatureHighWarning	INTEGER,
			rs2TemperatureLowWarning	INTEGER,
			rs2TemperatureLowCritical	INTEGER,
			rs2TemperatureRearm		INTEGER
		}

	rs2TemperatureRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs2TemperatureEntry 1 }

	rs2TemperatureIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the temperature sensor."
		::= { rs2TemperatureEntry 2 }

	rs2TemperatureValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The temperature reading for this RPC sensor."
		::= { rs2TemperatureEntry 3 }

	rs2TemperatureState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The temperature state relative to the thresholds."
		::= { rs2TemperatureEntry 4 }

	rs2TemperatureHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature high critical threshold."
		::= { rs2TemperatureEntry 5 }

	rs2TemperatureHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature high warning threshold."
		::= { rs2TemperatureEntry 6 }

	rs2TemperatureLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature low warning threshold."
		::= { rs2TemperatureEntry 7 }

	rs2TemperatureLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature low critical threshold."
		::= { rs2TemperatureEntry 8 }

	rs2TemperatureRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature rearm value."
		::= { rs2TemperatureEntry 9 }

	rs2BreakersTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS2BreakersEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of circuit breaker states."
		::= { rs2power 9 }

	rs2BreakersEntry OBJECT-TYPE
		SYNTAX RS2BreakersEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of circuit breaker states."
		INDEX { rs2BreakersRPCIndex, rs2BreakersIndex }
		::= { rs2BreakersTable 1 }

	RS2BreakersEntry ::=
		SEQUENCE {
			rs2BreakersRPCIndex	INTEGER,
			rs2BreakersIndex	INTEGER,
			rs2BreakersState	INTEGER
		}

	rs2BreakersRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index number of the RPC."
		::= { rs2BreakersEntry 1 }

	rs2BreakersIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index number of the circuit breaker."
		::= { rs2BreakersEntry 2 }

	rs2BreakersState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			notPresent(2)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The circuit breaker state."
		::= { rs2BreakersEntry 3 }


	-- traps

	rs2Port1PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the high critical state." 
		::= 501

	rs2Port1PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the high warning state." 
		::= 502

	rs2Port1PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the low warning state." 
		::= 503

	rs2Port1PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the low critical state." 
		::= 504

	rs2Port1PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the normal state." 
		::= 505

	rs2Port1VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the high critical state." 
		::= 506

	rs2Port1VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the high warning state." 
		::= 507

	rs2Port1VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the low warning state." 
		::= 508

	rs2Port1VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the low critical state." 
		::= 509

	rs2Port1VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the normal state." 
		::= 510

	rs2Port1CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the high critical state." 
		::= 511

	rs2Port1CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the high warning state." 
		::= 512

	rs2Port1CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the low warning state." 
		::= 513

	rs2Port1CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the low critical state." 
		::= 514

	rs2Port1CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the normal state." 
		::= 515

	rs2Port1TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the high critical state." 
		::= 516

	rs2Port1TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the high warning state." 
		::= 517

	rs2Port1TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the low warning state." 
		::= 518

	rs2Port1TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the low critical state." 
		::= 519

	rs2Port1TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the normal state." 
		::= 520

	rs2Port1PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the high critical state." 
		::= 521

	rs2Port1PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the high warning state." 
		::= 522

	rs2Port1PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the low warning state." 
		::= 523

	rs2Port1PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the low critical state." 
		::= 524

	rs2Port1PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the normal state." 
		::= 525

	rs2Port1VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the high critical state." 
		::= 526

	rs2Port1VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the high warning state." 
		::= 527

	rs2Port1VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the low warning state." 
		::= 528

	rs2Port1VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the low critical state." 
		::= 529

	rs2Port1VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the normal state." 
		::= 530

	rs2Port1CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the high critical state." 
		::= 531

	rs2Port1CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the high warning state." 
		::= 532

	rs2Port1CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the low warning state." 
		::= 533

	rs2Port1CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the low critical state." 
		::= 534

	rs2Port1CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the normal state." 
		::= 535

	rs2Port1TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the high critical state." 
		::= 536

	rs2Port1TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the high warning state." 
		::= 537

	rs2Port1TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the low warning state." 
		::= 538

	rs2Port1TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the low critical state." 
		::= 539

	rs2Port1TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the normal state." 
		::= 540

	rs2Port1PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the high critical state." 
		::= 541

	rs2Port1PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the high warning state." 
		::= 542

	rs2Port1PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the low warning state." 
		::= 543

	rs2Port1PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the low critical state." 
		::= 544

	rs2Port1PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the normal state." 
		::= 545

	rs2Port1VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the high critical state." 
		::= 546

	rs2Port1VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the high warning state." 
		::= 547

	rs2Port1VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the low warning state." 
		::= 548

	rs2Port1VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the low critical state." 
		::= 549

	rs2Port1VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the normal state." 
		::= 550

	rs2Port1CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the high critical state." 
		::= 551

	rs2Port1CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the high warning state." 
		::= 552

	rs2Port1CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the low warning state." 
		::= 553

	rs2Port1CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the low critical state." 
		::= 554

	rs2Port1CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the normal state." 
		::= 555

	rs2Port1TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the high critical state." 
		::= 556

	rs2Port1TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the high warning state." 
		::= 557

	rs2Port1TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the low warning state." 
		::= 558

	rs2Port1TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the low critical state." 
		::= 559

	rs2Port1TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the normal state." 
		::= 560

	rs2Port2PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the high critical state." 
		::= 561

	rs2Port2PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the high warning state." 
		::= 562

	rs2Port2PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the low warning state." 
		::= 563

	rs2Port2PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the low critical state." 
		::= 564

	rs2Port2PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the normal state." 
		::= 565

	rs2Port2VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the high critical state." 
		::= 566

	rs2Port2VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the high warning state." 
		::= 567

	rs2Port2VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the low warning state." 
		::= 568

	rs2Port2VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the low critical state." 
		::= 569

	rs2Port2VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the normal state." 
		::= 570

	rs2Port2CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the high critical state." 
		::= 571

	rs2Port2CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the high warning state." 
		::= 572

	rs2Port2CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the low warning state." 
		::= 573

	rs2Port2CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the low critical state." 
		::= 574

	rs2Port2CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the normal state." 
		::= 575

	rs2Port2TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the high critical state." 
		::= 576

	rs2Port2TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the high warning state." 
		::= 577

	rs2Port2TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the low warning state." 
		::= 578

	rs2Port2TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the low critical state." 
		::= 579

	rs2Port2TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the normal state." 
		::= 580

	rs2Port2PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the high critical state." 
		::= 581

	rs2Port2PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the high warning state." 
		::= 582

	rs2Port2PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the low warning state." 
		::= 583

	rs2Port2PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the low critical state." 
		::= 584

	rs2Port2PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the normal state." 
		::= 585

	rs2Port2VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the high critical state." 
		::= 586

	rs2Port2VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the high warning state." 
		::= 587

	rs2Port2VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the low warning state." 
		::= 588

	rs2Port2VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the low critical state." 
		::= 589

	rs2Port2VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the normal state." 
		::= 590

	rs2Port2CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the high critical state." 
		::= 591

	rs2Port2CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the high warning state." 
		::= 592

	rs2Port2CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the low warning state." 
		::= 593

	rs2Port2CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the low critical state." 
		::= 594

	rs2Port2CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the normal state." 
		::= 595

	rs2Port2TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the high critical state." 
		::= 596

	rs2Port2TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the high warning state." 
		::= 597

	rs2Port2TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the low warning state." 
		::= 598

	rs2Port2TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the low critical state." 
		::= 599

	rs2Port2TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the normal state." 
		::= 600

	rs2Port2PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the high critical state." 
		::= 601

	rs2Port2PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the high warning state." 
		::= 602

	rs2Port2PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the low warning state." 
		::= 603

	rs2Port2PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the low critical state." 
		::= 604

	rs2Port2PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2PowerRPCIndex,
			rs2PowerIndex,
			rs2PowerValue,
			rs2PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the normal state." 
		::= 605

	rs2Port2VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the high critical state." 
		::= 606

	rs2Port2VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the high warning state." 
		::= 607

	rs2Port2VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the low warning state." 
		::= 608

	rs2Port2VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the low critical state." 
		::= 609

	rs2Port2VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2VoltageRPCIndex,
			rs2VoltageIndex,
			rs2VoltageValue,
			rs2VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the normal state." 
		::= 610

	rs2Port2CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the high critical state." 
		::= 611

	rs2Port2CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the high warning state." 
		::= 612

	rs2Port2CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the low warning state." 
		::= 613

	rs2Port2CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the low critical state." 
		::= 614

	rs2Port2CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2CurrentRPCIndex,
			rs2CurrentIndex,
			rs2CurrentValue,
			rs2CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the normal state." 
		::= 615

	rs2Port2TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the high critical state." 
		::= 616

	rs2Port2TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the high warning state." 
		::= 617

	rs2Port2TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the low warning state." 
		::= 618

	rs2Port2TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the low critical state." 
		::= 619

	rs2Port2TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs2
		VARIABLES {
			sysDescr,
			rs2TemperatureRPCIndex,
			rs2TemperatureIndex,
			rs2TemperatureValue,
			rs2TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the normal state." 
		::= 620

END