-- BAY TECHNICAL ASSOCIATES (BAYTECH) MIB

-- Copyright (c) Bay Technical Associates 2003.
-- $Id: rs4.mib,v 1.3 2004/03/01 11:11:52 devel Exp $

-- Title: BAYTECH MIB for RS4 devices

-- *************************************************************************
-- ************************************************************************
-- Baytech-MIB { iso org(3) dod(6) internet(1) private(4)
--    enterprises(1) baytech(4779) }
--

Baytech-MIB DEFINITIONS ::= BEGIN

IMPORTS
   enterprises, IpAddress, Gauge, TimeTicks     FROM RFC1155-SMI
   DisplayString                                FROM RFC1213-MIB
   OBJECT-TYPE                                  FROM RFC-1212
   TRAP-TYPE                                    FROM RFC-1215;


	baytech		OBJECT IDENTIFIER ::= { enterprises 4779 }
	resseries	OBJECT IDENTIFIER ::= { baytech 4 }
	res2		OBJECT IDENTIFIER ::= { resseries 1 }
	res2p2		OBJECT IDENTIFIER ::= { resseries 2 }
	rs2		OBJECT IDENTIFIER ::= { resseries 3 }
	rs4		OBJECT IDENTIFIER ::= { resseries 4 }
	rs4system	OBJECT IDENTIFIER ::= { rs4 1 }
	rs4serial	OBJECT IDENTIFIER ::= { rs4 2 }
	rs4power	OBJECT IDENTIFIER ::= { rs4 3 }


	-- the rs4 system information

	-- the rs4 serial information

	-- the rs4 RPC information

	rs4PowerCntrlNumber OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of attached RPCs."
		::= { rs4power 1 }

	rs4PowerCntrlTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4PowerCntrlEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of RPC information."
		::= { rs4power 2 }

	rs4PowerCntrlEntry OBJECT-TYPE
		SYNTAX RS4PowerCntrlEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of RPC information."
		INDEX { rs4CntrlIndex }
		::= { rs4PowerCntrlTable 1 }

	RS4PowerCntrlEntry ::=
		SEQUENCE {
			rs4CntrlIndex				INTEGER,
			rs4CntrlState				INTEGER,
			rs4CntrlModelName			DisplayString,
			rs4CntrlName				DisplayString,
			rs4CntrlFirmwareVersion			DisplayString,
			rs4CntrlNumberOfOutlets			INTEGER,
			rs4CntrlNumberOfCurrentSensors		INTEGER,
			rs4CntrlNumberOfVoltageSensors		INTEGER,
			rs4CntrlNumberOfPowerSensors		INTEGER,
			rs4CntrlNumberOfTemperatureSensors	INTEGER,
			rs4CntrlNumberOfCircuitBreakers		INTEGER,
			rs4CntrlTotalCurrent			INTEGER,
			rs4CntrlMaxTotalCurrent			INTEGER,
			rs4CntrlTotalPower			INTEGER
		}

	rs4CntrlIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index into the RPC information table."
		::= { rs4PowerCntrlEntry 1 }

	rs4CntrlState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
			}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The overall state relative to the thresholds." 
		::= { rs4PowerCntrlEntry 2 }

	rs4CntrlModelName OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The model name of this RPC."
		::= { rs4PowerCntrlEntry 3 }

	rs4CntrlName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..12))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The name of this RPC."
		::= { rs4PowerCntrlEntry 4 }

	rs4CntrlFirmwareVersion OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The firmware version of this RPC."
		::= { rs4PowerCntrlEntry 5 }

	rs4CntrlNumberOfOutlets OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Number of controllable outlets on this RPC."
		::= { rs4PowerCntrlEntry 6 }

	rs4CntrlNumberOfCurrentSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of current sensors installed in this RPC."
		::= { rs4PowerCntrlEntry 7 }

	rs4CntrlNumberOfVoltageSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of voltage sensors installed in this RPC."
		::= { rs4PowerCntrlEntry 8 }

	rs4CntrlNumberOfPowerSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of power calculations for this RPC."
		::= { rs4PowerCntrlEntry 9 }

	rs4CntrlNumberOfTemperatureSensors OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of temperature sensors installed in this RPC."
		::= { rs4PowerCntrlEntry 10 }

	rs4CntrlNumberOfCircuitBreakers OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of circuit breakers installed in this RPC."
		::= { rs4PowerCntrlEntry 11 }

	rs4CntrlTotalCurrent OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total current of all current sensors in this RPC."
		::= { rs4PowerCntrlEntry 12 }

	rs4CntrlMaxTotalCurrent OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total maximum detected current of all current sensors in this RPC."
		::= { rs4PowerCntrlEntry 13 }

	rs4CntrlTotalPower OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The combined total power of all power sensors in this RPC."
		::= { rs4PowerCntrlEntry 14 }

	rs4OutletTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4OutletEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of controllable RPC outlets."
		::= { rs4power 3 }

	rs4OutletEntry OBJECT-TYPE
		SYNTAX RS4OutletEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of controllable RPC outlets."
		INDEX { rs4OutletRPCIndex, rs4OutletIndex }
		::= { rs4OutletTable 1 }

	RS4OutletEntry ::=
		SEQUENCE {
			rs4OutletRPCIndex	INTEGER,
			rs4OutletIndex		INTEGER,
			rs4OutletState		INTEGER,
			rs4OutletName		DisplayString
		}

	rs4OutletRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4OutletEntry 1 }

	rs4OutletIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the outlet."
		::= { rs4OutletEntry 2 }

	rs4OutletState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			reboot(2),
			lockon(3),
			lockoff(4),
			unlock(5),
			unknown(6)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
 			"Getting this variable will return the state of the outlet;
  			setting this variable will set the state of the outlet."
		::= { rs4OutletEntry 3 }

	rs4OutletName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..12))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The name of the outlet."
		::= { rs4OutletEntry 4 }

	rs4AllOutletsTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4AllOutletsEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table to control all RPC outlets."
		::= { rs4power 4 }

	rs4AllOutletsEntry OBJECT-TYPE
		SYNTAX RS4AllOutletsEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry to control all RPC outlets."
		INDEX { rs4AllOutletsRPCIndex }
		::= { rs4AllOutletsTable 1 }

	RS4AllOutletsEntry ::=
		SEQUENCE {
			rs4AllOutletsRPCIndex	INTEGER,
			rs4AllOutletsState	INTEGER,
			rs4AllOutletsStatus	DisplayString
		}

	rs4AllOutletsRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4AllOutletsEntry 1 }


	rs4AllOutletsState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			reboot(2),
			none(3)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Turns all outlets on, off or reboot."
		::= { rs4AllOutletsEntry 2 }

	rs4AllOutletsStatus OBJECT-TYPE
		SYNTAX DisplayString
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"Reports status of outlets in a comma delimitated string (0 = off; 1 = on; 2 = reboot; 3 = locked on; 4 = locked off)."
		::= { rs4AllOutletsEntry 3 }

	rs4CurrentTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4CurrentEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of current values."
		::= { rs4power 5 }

	rs4CurrentEntry OBJECT-TYPE
		SYNTAX RS4CurrentEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of current values."
		INDEX { rs4CurrentRPCIndex, rs4CurrentIndex }
		::= { rs4CurrentTable 1 }

	RS4CurrentEntry ::=
		SEQUENCE {
			rs4CurrentRPCIndex	INTEGER,
			rs4CurrentIndex		INTEGER,
			rs4CurrentValue		INTEGER,
			rs4CurrentMaxValue	INTEGER,
			rs4CurrentState		INTEGER,
			rs4CurrentHighCriticl	INTEGER,
			rs4CurrentHighWarning	INTEGER,
			rs4CurrentLowWarning	INTEGER,
			rs4CurrentLowCritical	INTEGER,
			rs4CurrentRearm		INTEGER
		}

	rs4CurrentRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4CurrentEntry 1 }

	rs4CurrentIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the current sensor."
		::= { rs4CurrentEntry 2 }

	rs4CurrentValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current reading for this RPC sensor."
		::= { rs4CurrentEntry 3 }

	rs4CurrentMaxValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The maximum detected current reading for this RPC sensor."
		::= { rs4CurrentEntry 4 }

	rs4CurrentState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current state relative to the thresholds."
		::= { rs4CurrentEntry 5 }

	rs4CurrentHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current high critical threshold."
		::= { rs4CurrentEntry 6 }

	rs4CurrentHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current high warning threshold."
		::= { rs4CurrentEntry 7 }

	rs4CurrentLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current low warning threshold."
		::= { rs4CurrentEntry 8 }

	rs4CurrentLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current low critical threshold."
		::= { rs4CurrentEntry 9 }

	rs4CurrentRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The current rearm value."
		::= { rs4CurrentEntry 10 }

	rs4VoltageTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4VoltageEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of voltage values."
		::= { rs4power 6 }

	rs4VoltageEntry OBJECT-TYPE
		SYNTAX RS4VoltageEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of voltage values."
		INDEX { rs4VoltageRPCIndex, rs4VoltageIndex }
		::= { rs4VoltageTable 1 }

	RS4VoltageEntry ::=
		SEQUENCE {
			rs4VoltageRPCIndex	INTEGER,
			rs4VoltageIndex		INTEGER,
			rs4VoltageValue		INTEGER,
			rs4VoltageState		INTEGER,
			rs4VoltageHighCritical	INTEGER,
			rs4VoltageHighWarning	INTEGER,
			rs4VoltageLowWarning	INTEGER,
			rs4VoltageLowCritical	INTEGER,
			rs4VoltageRearm		INTEGER
		}

	rs4VoltageRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4VoltageEntry 1 }

	rs4VoltageIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the voltage sensor."
		::= { rs4VoltageEntry 2 }

	rs4VoltageValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The voltage reading for this RPC sensor."
		::= { rs4VoltageEntry 3 }

	rs4VoltageState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The voltage state relative to the thresholds."
		::= { rs4VoltageEntry 4 }

	rs4VoltageHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage high critical threshold."
		::= { rs4VoltageEntry 5 }

	rs4VoltageHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage high warning threshold."
		::= { rs4VoltageEntry 6 }

	rs4VoltageLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage low warning threshold."
		::= { rs4VoltageEntry 7 }

	rs4VoltageLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage low critical threshold."
		::= { rs4VoltageEntry 8 }

	rs4VoltageRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The voltage rearm value."
		::= { rs4VoltageEntry 9 }

	rs4PowerTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4PowerEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of power values."
		::= { rs4power 7 }

	rs4PowerEntry OBJECT-TYPE
		SYNTAX RS4PowerEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of power values."
		INDEX { rs4PowerRPCIndex, rs4PowerIndex }
		::= { rs4PowerTable 1 }

	RS4PowerEntry ::=
		SEQUENCE {
			rs4PowerRPCIndex	INTEGER,
			rs4PowerIndex		INTEGER,
			rs4PowerValue		INTEGER,
			rs4PowerState		INTEGER,
			rs4PowerHighCritical	INTEGER,
			rs4PowerHighWarning	INTEGER,
			rs4PowerLowWarning	INTEGER,
			rs4PowerLowCritical	INTEGER,
			rs4PowerRearm		INTEGER
		}

	rs4PowerRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4PowerEntry 1 }

	rs4PowerIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the power sensor."
		::= { rs4PowerEntry 2 }

	rs4PowerValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The power reading for this RPC sensor."
		::= { rs4PowerEntry 3 }

	rs4PowerState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The power state relative to the thresholds."
		::= { rs4PowerEntry 4 }

	rs4PowerHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power high critical threshold."
		::= { rs4PowerEntry 5 }

	rs4PowerHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power high warning threshold."
		::= { rs4PowerEntry 6 }

	rs4PowerLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power low warning threshold."
		::= { rs4PowerEntry 7 }

	rs4PowerLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power low critical threshold."
		::= { rs4PowerEntry 8 }

	rs4PowerRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The power rearm value."
		::= { rs4PowerEntry 9 }

	rs4TemperatureTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4TemperatureEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of temperature values."
		::= { rs4power 8 }

	rs4TemperatureEntry OBJECT-TYPE
		SYNTAX RS4TemperatureEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of temperature values."
		INDEX { rs4TemperatureRPCIndex, rs4TemperatureIndex }
		::= { rs4TemperatureTable 1 }

	RS4TemperatureEntry ::=
		SEQUENCE {
			rs4TemperatureRPCIndex		INTEGER,
			rs4TemperatureIndex		INTEGER,
			rs4TemperatureValue		INTEGER,
			rs4TemperatureState		INTEGER,
			rs4TemperatureHighCritical	INTEGER,
			rs4TemperatureHighWarning	INTEGER,
			rs4TemperatureLowWarning	INTEGER,
			rs4TemperatureLowCritical	INTEGER,
			rs4TemperatureRearm		INTEGER
		}

	rs4TemperatureRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the RPC."
		::= { rs4TemperatureEntry 1 }

	rs4TemperatureIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index of the temperature sensor."
		::= { rs4TemperatureEntry 2 }

	rs4TemperatureValue OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The temperature reading for this RPC sensor."
		::= { rs4TemperatureEntry 3 }

	rs4TemperatureState OBJECT-TYPE
		SYNTAX INTEGER {
			highCritical(1),
			highWarning(2),
			lowWarning(3),
			lowCritical(4),
			normal(5),
			notPresent(6)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The temperature state relative to the thresholds."
		::= { rs4TemperatureEntry 4 }

	rs4TemperatureHighCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature high critical threshold."
		::= { rs4TemperatureEntry 5 }

	rs4TemperatureHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature high warning threshold."
		::= { rs4TemperatureEntry 6 }

	rs4TemperatureLowWarning OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature low warning threshold."
		::= { rs4TemperatureEntry 7 }

	rs4TemperatureLowCritical OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature low critical threshold."
		::= { rs4TemperatureEntry 8 }

	rs4TemperatureRearm OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The temperature rearm value."
		::= { rs4TemperatureEntry 9 }

	rs4BreakersTable OBJECT-TYPE
		SYNTAX SEQUENCE OF RS4BreakersEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table of circuit breaker states."
		::= { rs4power 9 }

	rs4BreakersEntry OBJECT-TYPE
		SYNTAX RS4BreakersEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Table entry of circuit breaker states."
		INDEX { rs4BreakersRPCIndex, rs4BreakersIndex }
		::= { rs4BreakersTable 1 }

	RS4BreakersEntry ::=
		SEQUENCE {
			rs4BreakersRPCIndex	INTEGER,
			rs4BreakersIndex	INTEGER,
			rs4BreakersState	INTEGER
		}

	rs4BreakersRPCIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index number of the RPC."
		::= { rs4BreakersEntry 1 }

	rs4BreakersIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index number of the circuit breaker."
		::= { rs4BreakersEntry 2 }

	rs4BreakersState OBJECT-TYPE
		SYNTAX INTEGER {
			off(0),
			on(1),
			notPresent(2)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The circuit breaker state."
		::= { rs4BreakersEntry 3 }


	-- traps

	rs4Port1PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the high critical state." 
		::= 501

	rs4Port1PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the high warning state." 
		::= 502

	rs4Port1PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the low warning state." 
		::= 503

	rs4Port1PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the low critical state." 
		::= 504

	rs4Port1PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 1, is in the normal state." 
		::= 505

	rs4Port1VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the high critical state." 
		::= 506

	rs4Port1VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the high warning state." 
		::= 507

	rs4Port1VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the low warning state." 
		::= 508

	rs4Port1VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the low critical state." 
		::= 509

	rs4Port1VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 1, is in the normal state." 
		::= 510

	rs4Port1CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the high critical state." 
		::= 511

	rs4Port1CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the high warning state." 
		::= 512

	rs4Port1CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the low warning state." 
		::= 513

	rs4Port1CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the low critical state." 
		::= 514

	rs4Port1CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 1, is in the normal state." 
		::= 515

	rs4Port1TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the high critical state." 
		::= 516

	rs4Port1TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the high warning state." 
		::= 517

	rs4Port1TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the low warning state." 
		::= 518

	rs4Port1TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the low critical state." 
		::= 519

	rs4Port1TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 1, is in the normal state." 
		::= 520

	rs4Port1PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the high critical state." 
		::= 521

	rs4Port1PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the high warning state." 
		::= 522

	rs4Port1PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the low warning state." 
		::= 523

	rs4Port1PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the low critical state." 
		::= 524

	rs4Port1PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 2, is in the normal state." 
		::= 525

	rs4Port1VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the high critical state." 
		::= 526

	rs4Port1VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the high warning state." 
		::= 527

	rs4Port1VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the low warning state." 
		::= 528

	rs4Port1VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the low critical state." 
		::= 529

	rs4Port1VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 2, is in the normal state." 
		::= 530

	rs4Port1CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the high critical state." 
		::= 531

	rs4Port1CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the high warning state." 
		::= 532

	rs4Port1CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the low warning state." 
		::= 533

	rs4Port1CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the low critical state." 
		::= 534

	rs4Port1CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 2, is in the normal state." 
		::= 535

	rs4Port1TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the high critical state." 
		::= 536

	rs4Port1TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the high warning state." 
		::= 537

	rs4Port1TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the low warning state." 
		::= 538

	rs4Port1TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the low critical state." 
		::= 539

	rs4Port1TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 2, is in the normal state." 
		::= 540

	rs4Port1PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the high critical state." 
		::= 541

	rs4Port1PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the high warning state." 
		::= 542

	rs4Port1PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the low warning state." 
		::= 543

	rs4Port1PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the low critical state." 
		::= 544

	rs4Port1PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 1, power sensor 3, is in the normal state." 
		::= 545

	rs4Port1VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the high critical state." 
		::= 546

	rs4Port1VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the high warning state." 
		::= 547

	rs4Port1VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the low warning state." 
		::= 548

	rs4Port1VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the low critical state." 
		::= 549

	rs4Port1VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 1, voltage sensor 3, is in the normal state." 
		::= 550

	rs4Port1CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the high critical state." 
		::= 551

	rs4Port1CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the high warning state." 
		::= 552

	rs4Port1CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the low warning state." 
		::= 553

	rs4Port1CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the low critical state." 
		::= 554

	rs4Port1CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 1, current sensor 3, is in the normal state." 
		::= 555

	rs4Port1TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the high critical state." 
		::= 556

	rs4Port1TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the high warning state." 
		::= 557

	rs4Port1TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the low warning state." 
		::= 558

	rs4Port1TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the low critical state." 
		::= 559

	rs4Port1TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 1, temperature sensor 3, is in the normal state." 
		::= 560

	rs4Port2PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the high critical state." 
		::= 561

	rs4Port2PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the high warning state." 
		::= 562

	rs4Port2PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the low warning state." 
		::= 563

	rs4Port2PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the low critical state." 
		::= 564

	rs4Port2PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 1, is in the normal state." 
		::= 565

	rs4Port2VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the high critical state." 
		::= 566

	rs4Port2VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the high warning state." 
		::= 567

	rs4Port2VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the low warning state." 
		::= 568

	rs4Port2VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the low critical state." 
		::= 569

	rs4Port2VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 1, is in the normal state." 
		::= 570

	rs4Port2CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the high critical state." 
		::= 571

	rs4Port2CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the high warning state." 
		::= 572

	rs4Port2CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the low warning state." 
		::= 573

	rs4Port2CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the low critical state." 
		::= 574

	rs4Port2CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 1, is in the normal state." 
		::= 575

	rs4Port2TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the high critical state." 
		::= 576

	rs4Port2TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the high warning state." 
		::= 577

	rs4Port2TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the low warning state." 
		::= 578

	rs4Port2TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the low critical state." 
		::= 579

	rs4Port2TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 1, is in the normal state." 
		::= 580

	rs4Port2PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the high critical state." 
		::= 581

	rs4Port2PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the high warning state." 
		::= 582

	rs4Port2PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the low warning state." 
		::= 583

	rs4Port2PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the low critical state." 
		::= 584

	rs4Port2PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 2, is in the normal state." 
		::= 585

	rs4Port2VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the high critical state." 
		::= 586

	rs4Port2VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the high warning state." 
		::= 587

	rs4Port2VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the low warning state." 
		::= 588

	rs4Port2VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the low critical state." 
		::= 589

	rs4Port2VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 2, is in the normal state." 
		::= 590

	rs4Port2CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the high critical state." 
		::= 591

	rs4Port2CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the high warning state." 
		::= 592

	rs4Port2CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the low warning state." 
		::= 593

	rs4Port2CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the low critical state." 
		::= 594

	rs4Port2CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 2, is in the normal state." 
		::= 595

	rs4Port2TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the high critical state." 
		::= 596

	rs4Port2TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the high warning state." 
		::= 597

	rs4Port2TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the low warning state." 
		::= 598

	rs4Port2TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the low critical state." 
		::= 599

	rs4Port2TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 2, is in the normal state." 
		::= 600

	rs4Port2PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the high critical state." 
		::= 601

	rs4Port2PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the high warning state." 
		::= 602

	rs4Port2PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the low warning state." 
		::= 603

	rs4Port2PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the low critical state." 
		::= 604

	rs4Port2PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 2, power sensor 3, is in the normal state." 
		::= 605

	rs4Port2VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the high critical state." 
		::= 606

	rs4Port2VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the high warning state." 
		::= 607

	rs4Port2VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the low warning state." 
		::= 608

	rs4Port2VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the low critical state." 
		::= 609

	rs4Port2VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 2, voltage sensor 3, is in the normal state." 
		::= 610

	rs4Port2CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the high critical state." 
		::= 611

	rs4Port2CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the high warning state." 
		::= 612

	rs4Port2CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the low warning state." 
		::= 613

	rs4Port2CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the low critical state." 
		::= 614

	rs4Port2CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 2, current sensor 3, is in the normal state." 
		::= 615

	rs4Port2TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the high critical state." 
		::= 616

	rs4Port2TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the high warning state." 
		::= 617

	rs4Port2TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the low warning state." 
		::= 618

	rs4Port2TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the low critical state." 
		::= 619

	rs4Port2TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 2, temperature sensor 3, is in the normal state." 
		::= 620

	rs4Port3PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 1, is in the high critical state." 
		::= 621

	rs4Port3PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 1, is in the high warning state." 
		::= 622

	rs4Port3PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 1, is in the low warning state." 
		::= 623

	rs4Port3PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 1, is in the low critical state." 
		::= 624

	rs4Port3PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 1, is in the normal state." 
		::= 625

	rs4Port3VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 1, is in the high critical state." 
		::= 626

	rs4Port3VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 1, is in the high warning state." 
		::= 627

	rs4Port3VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 1, is in the low warning state." 
		::= 628

	rs4Port3VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 1, is in the low critical state." 
		::= 629

	rs4Port3VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 1, is in the normal state." 
		::= 630

	rs4Port3CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 1, is in the high critical state." 
		::= 631

	rs4Port3CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 1, is in the high warning state." 
		::= 632

	rs4Port3CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 1, is in the low warning state." 
		::= 633

	rs4Port3CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 1, is in the low critical state." 
		::= 634

	rs4Port3CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 1, is in the normal state." 
		::= 635

	rs4Port3TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 1, is in the high critical state." 
		::= 636

	rs4Port3TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 1, is in the high warning state." 
		::= 637

	rs4Port3TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 1, is in the low warning state." 
		::= 638

	rs4Port3TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 1, is in the low critical state." 
		::= 639

	rs4Port3TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 1, is in the normal state." 
		::= 640

	rs4Port3PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 2, is in the high critical state." 
		::= 641

	rs4Port3PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 2, is in the high warning state." 
		::= 642

	rs4Port3PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 2, is in the low warning state." 
		::= 643

	rs4Port3PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 2, is in the low critical state." 
		::= 644

	rs4Port3PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 2, is in the normal state." 
		::= 645

	rs4Port3VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 2, is in the high critical state." 
		::= 646

	rs4Port3VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 2, is in the high warning state." 
		::= 647

	rs4Port3VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 2, is in the low warning state." 
		::= 648

	rs4Port3VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 2, is in the low critical state." 
		::= 649

	rs4Port3VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 2, is in the normal state." 
		::= 650

	rs4Port3CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 2, is in the high critical state." 
		::= 651

	rs4Port3CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 2, is in the high warning state." 
		::= 652

	rs4Port3CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 2, is in the low warning state." 
		::= 653

	rs4Port3CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 2, is in the low critical state." 
		::= 654

	rs4Port3CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 2, is in the normal state." 
		::= 655

	rs4Port3TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 2, is in the high critical state." 
		::= 656

	rs4Port3TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 2, is in the high warning state." 
		::= 657

	rs4Port3TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 2, is in the low warning state." 
		::= 658

	rs4Port3TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 2, is in the low critical state." 
		::= 659

	rs4Port3TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 2, is in the normal state." 
		::= 660

	rs4Port3PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 3, is in the high critical state." 
		::= 661

	rs4Port3PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 3, is in the high warning state." 
		::= 662

	rs4Port3PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 3, is in the low warning state." 
		::= 663

	rs4Port3PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 3, is in the low critical state." 
		::= 664

	rs4Port3PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 3, power sensor 3, is in the normal state." 
		::= 665

	rs4Port3VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 3, is in the high critical state." 
		::= 666

	rs4Port3VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 3, is in the high warning state." 
		::= 667

	rs4Port3VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 3, is in the low warning state." 
		::= 668

	rs4Port3VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 3, is in the low critical state." 
		::= 669

	rs4Port3VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 3, voltage sensor 3, is in the normal state." 
		::= 670

	rs4Port3CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 3, is in the high critical state." 
		::= 671

	rs4Port3CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 3, is in the high warning state." 
		::= 672

	rs4Port3CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 3, is in the low warning state." 
		::= 673

	rs4Port3CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 3, is in the low critical state." 
		::= 674

	rs4Port3CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 3, current sensor 3, is in the normal state." 
		::= 675

	rs4Port3TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 3, is in the high critical state." 
		::= 676

	rs4Port3TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 3, is in the high warning state." 
		::= 677

	rs4Port3TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 3, is in the low warning state." 
		::= 678

	rs4Port3TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 3, is in the low critical state." 
		::= 679

	rs4Port3TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 3, temperature sensor 3, is in the normal state." 
		::= 680

	rs4Port4PowerSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 1, is in the high critical state." 
		::= 681

	rs4Port4PowerSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 1, is in the high warning state." 
		::= 682

	rs4Port4PowerSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 1, is in the low warning state." 
		::= 683

	rs4Port4PowerSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 1, is in the low critical state." 
		::= 684

	rs4Port4PowerSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 1, is in the normal state." 
		::= 685

	rs4Port4VoltageSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 1, is in the high critical state." 
		::= 686

	rs4Port4VoltageSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 1, is in the high warning state." 
		::= 687

	rs4Port4VoltageSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 1, is in the low warning state." 
		::= 688

	rs4Port4VoltageSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 1, is in the low critical state." 
		::= 689

	rs4Port4VoltageSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 1, is in the normal state." 
		::= 690

	rs4Port4CurrentSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 1, is in the high critical state." 
		::= 691

	rs4Port4CurrentSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 1, is in the high warning state." 
		::= 692

	rs4Port4CurrentSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 1, is in the low warning state." 
		::= 693

	rs4Port4CurrentSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 1, is in the low critical state." 
		::= 694

	rs4Port4CurrentSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 1, is in the normal state." 
		::= 695

	rs4Port4TemperatureSensor1HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 1, is in the high critical state." 
		::= 696

	rs4Port4TemperatureSensor1HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 1, is in the high warning state." 
		::= 697

	rs4Port4TemperatureSensor1LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 1, is in the low warning state." 
		::= 698

	rs4Port4TemperatureSensor1LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 1, is in the low critical state." 
		::= 699

	rs4Port4TemperatureSensor1Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 1, is in the normal state." 
		::= 700

	rs4Port4PowerSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 2, is in the high critical state." 
		::= 701

	rs4Port4PowerSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 2, is in the high warning state." 
		::= 702

	rs4Port4PowerSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 2, is in the low warning state." 
		::= 703

	rs4Port4PowerSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 2, is in the low critical state." 
		::= 704

	rs4Port4PowerSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 2, is in the normal state." 
		::= 705

	rs4Port4VoltageSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 2, is in the high critical state." 
		::= 706

	rs4Port4VoltageSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 2, is in the high warning state." 
		::= 707

	rs4Port4VoltageSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 2, is in the low warning state." 
		::= 708

	rs4Port4VoltageSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 2, is in the low critical state." 
		::= 709

	rs4Port4VoltageSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 2, is in the normal state." 
		::= 710

	rs4Port4CurrentSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 2, is in the high critical state." 
		::= 711

	rs4Port4CurrentSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 2, is in the high warning state." 
		::= 712

	rs4Port4CurrentSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 2, is in the low warning state." 
		::= 713

	rs4Port4CurrentSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 2, is in the low critical state." 
		::= 714

	rs4Port4CurrentSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 2, is in the normal state." 
		::= 715

	rs4Port4TemperatureSensor2HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 2, is in the high critical state." 
		::= 716

	rs4Port4TemperatureSensor2HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 2, is in the high warning state." 
		::= 717

	rs4Port4TemperatureSensor2LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 2, is in the low warning state." 
		::= 718

	rs4Port4TemperatureSensor2LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 2, is in the low critical state." 
		::= 719

	rs4Port4TemperatureSensor2Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 2, is in the normal state." 
		::= 720

	rs4Port4PowerSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 3, is in the high critical state." 
		::= 721

	rs4Port4PowerSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 3, is in the high warning state." 
		::= 722

	rs4Port4PowerSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 3, is in the low warning state." 
		::= 723

	rs4Port4PowerSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 3, is in the low critical state." 
		::= 724

	rs4Port4PowerSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4PowerRPCIndex,
			rs4PowerIndex,
			rs4PowerValue,
			rs4PowerState
			}
		DESCRIPTION
			"Port 4, power sensor 3, is in the normal state." 
		::= 725

	rs4Port4VoltageSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 3, is in the high critical state." 
		::= 726

	rs4Port4VoltageSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 3, is in the high warning state." 
		::= 727

	rs4Port4VoltageSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 3, is in the low warning state." 
		::= 728

	rs4Port4VoltageSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 3, is in the low critical state." 
		::= 729

	rs4Port4VoltageSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4VoltageRPCIndex,
			rs4VoltageIndex,
			rs4VoltageValue,
			rs4VoltageState
			}
		DESCRIPTION
			"Port 4, voltage sensor 3, is in the normal state." 
		::= 730

	rs4Port4CurrentSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 3, is in the high critical state." 
		::= 731

	rs4Port4CurrentSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 3, is in the high warning state." 
		::= 732

	rs4Port4CurrentSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 3, is in the low warning state." 
		::= 733

	rs4Port4CurrentSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 3, is in the low critical state." 
		::= 734

	rs4Port4CurrentSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4CurrentRPCIndex,
			rs4CurrentIndex,
			rs4CurrentValue,
			rs4CurrentState
			}
		DESCRIPTION
			"Port 4, current sensor 3, is in the normal state." 
		::= 735

	rs4Port4TemperatureSensor3HighCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 3, is in the high critical state." 
		::= 736

	rs4Port4TemperatureSensor3HighWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 3, is in the high warning state." 
		::= 737

	rs4Port4TemperatureSensor3LowWarning TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 3, is in the low warning state." 
		::= 738

	rs4Port4TemperatureSensor3LowCritical TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 3, is in the low critical state." 
		::= 739

	rs4Port4TemperatureSensor3Normal TRAP-TYPE
		ENTERPRISE rs4
		VARIABLES {
			sysDescr,
			rs4TemperatureRPCIndex,
			rs4TemperatureIndex,
			rs4TemperatureValue,
			rs4TemperatureState
			}
		DESCRIPTION
			"Port 4, temperature sensor 3, is in the normal state." 
		::= 740

END