Products

MMPr Series
PDUr - Redundant Remote Metered and Switched or Non-Switched

redundantsw3

The robust design incorporates our Zero-Crossing transfer while utilizing heavy duty relay’s for fast, reliable out-of-phase transfers.

Redundant Remote Metered and Switched or Non-Switched PDU and ATS in one unit!

2 full data center appliances in 1 single asset.

Download the MMPr List below to see selection or visit the the BayTech Product Finder:

 

MMPr Part Number List

The MMPr series is available in both vertical or horizontal form as well as single or 3-phase solutions. All of these units are metered outlet some are outlet control, some are not.

3-Phase solutions only available in 208V 3Ø∆ at the moment. Single Phase 120, 208, and 230 Volt options ranging 15, 16, 20, 30, and 32 Input Amps. The Vertical units are all ZeroU and are anywhere from 35” to 70” in length. Then there’s the horizontal 1.5U and 2U units, all of which are 10.02″ deep and 16.72″ wide.

In terms of output receptacles, most options include 8, 10, 12, 16, 24 or 30 receptacles.

For network capabilities, the 3 controller options are:

    • CM31 and CM33 – No IP; 1 RS232 port and no Ethernet ports
    • CM42 and CM45 – Direct IPv4/IPv6; 10/100 BaseT; 1 USB-B port and 1 Ethernet port
    • CM40 and CM44 – Direct IPv4/IPv6; 10/100 BaseT; 10/100/1000 BaseT; 1 USB-A, 1 USB-B port, and 2 Ethernet Ports

BayTech’s secure network interface provides access, control and reporting. Information provided by the MMPr includes kWh, amps and voltage per receptacle. Sensor ports on the interface can be used with a number of sensors such as temperature and humidity.

 

  • Transfer time under 15ms
  • Single phase solutions up to 32 amps
  • Integrated Back feed protection
  • Robust design with heavy duty 50 amp relays
  • Available Zero U and Rack MMP products
  • Status and Alarm Display
  • Local Console Interface
  • Sensor Ports for External Sensors
  • IP Port for WWW and SNMP