The robust design incorporates our Zero-Crossing transfer while utilizing heavy duty relay’s for fast, reliable out-of-phase transfers.
Remote Outlet Control PDU and ATS in one unit – two input plugs!
Download the MRPr List below to see standard selection or visit the BayTech Product Finder:
All of these units have no metered outlet but do have outlet control.
BayTech’s Single Phase 120, 208, and 230 Volt options ranging 15, 16, 20, and 30 Amps. Horizontal 1.5U and 2U units are most popular, all of which are 10.02″ deep and 16.72″ wide.
In terms of output receptacles, most options include 8, 10, 14, 16 or 20 receptacles.
For network capabilities, the 3 below controller options:
-
- CM31 and CM33 – No IP; 1 RS232 port and no Ethernet ports
- CM42 and CM45 – Direct IPv4/IPv6; 10/100 BaseT; 1 USB-B port and 1 Ethernet port
- CM40 and CM44 – Direct IPv4/IPv6; 10/100 BaseT; 10/100/1000 BaseT; 1 USB-A, 1 USB-B port, and 2 Ethernet Ports
The robust design incorporates our Zero-Crossing transfer while utilizing heavy duty relay’s for fast, reliable out-of-phase transfers.
Continue reading “MMPr Series”
BayTech’s transfer switch unit for the MSP product line provides ZeroU and Rackmount transfer switch options with circuit metering.
The robust design incorporates our Zero-Crossing transfer while utilizing heavy duty relay’s for fast, reliable out-of-phase transfers.
Remote Metering PDU and ATS in one unit – two input plugs!
Download from the MSPr Lists below to see BayTech’s redundant metered selection or use the BayTech Product Finder:
BayTech’s most popular redundant offering with 250+ standard part numbers; all of which are single phase, either 120, 208, or 230V, and come in both Vertical or Horizontal orientations. Input Amps anywhere from 10A to 32A and these are smart devices, however, no metered outlet or outlet control.
BayTech’s secure network interface provides access, control and reporting. Information provided by the MSPr includes circuit level kWh, amps and voltage. Sensor ports on the interface can be used with a number of sensors such as temperature and humidity.
BayTech’s redundant power transfer switch offers a unique approach to performing the transfer by completely severing the connection between the source and load and waiting for the zerocrossing to perform the transfer.
BayTech’s out-of-phase transfer design promotes a low cost solution for the reliability and uptime of your single cord devices.
Download our full list of standard ATS solutions:
Providing redundancy at the power circuit level is critical to maintaining uptime. The ATS Series provides a simple and reliable solution for sensing power loss and seamlessly switching to a back-up circuit. Power measurement is standard.
The DS‐Series serves as an IP concentrator eliminating the need for an IP address per managed power strip.
By consolidating the need for an IP address per managed power strip, data centers can gain considerable short and long term savings by:
-
Managing multiple power strips with one IP
-
Eliminating the need for supporting network hardware
-
Eliminating Yearly Maintenance Cost per IP by $100 ‐ $400
Download our Data Switch (DS) Datasheet here to see our selection:
Data Switch (for IP Consolidation)
This product has 3 models that comes in 4-port modular design increments:
- DS3 – one controller module and 2 I/O Modules (8 ports)
- DS6 – one controller module and 5 I/O Modules (20 ports)
- DS9 – one controller module and 8 I/O Modules (32 ports)
DS-RPC (Remote Site Manager)
Customers state: “95% of what you can do onsite can be done without having to roll-a-truck.”
The DS-RPC provides network or dial-up access to remote locations allowing you to configure, check status or reboot locked equipment. The DS-RPC also provides circuit metering and internal temperature reporting.
Security features such as SSH v2, RADIUS and/or TACACS provide secure data transport and authentication.
Your choice of host module provides either secure in-band and/or out-of-band access to your network infrastructure.
The Modular Distribution Power (MDP) strip is our basic PDU geared toward cost conscious buyers needing highly reliable non-metered power distribution.
BayTech’s largest MDP customer owns 40,000+ units with no rejects or failures; the reliability you can expect!
Continue reading “MDP Series”
The Modular Sensor Power (MSP) strip meters to the branch circuit and input level.
This strip does not have metered outlet, nor outlet control, however, it does have a controller interface for sensing management at the branch level.
Vertical MSPs – ZeroU
Below are 3 lists of our Vertical standard offerings by interface capability in order from No IP (CM31) to Direct IPv4/v6; 10/100 BaseT (CM42) to Direct IPv4/v6; 10/100 BaseT, 10/100/1000 BaseT (CM40).
If you are still unable to find the right model for your project, try looking at the MRP Vertical units (a step up) or maybe the MDP Vertical units (a step down).
Horizontal MSPs – Rackmount
Below are 3 lists the horizontal standard offerings by interface capability in order from No IP (CM31 and CM33) to Direct IPv4/v6; 10/100 BaseT (CM42 and CM45) to Direct IPv4/v6; 10/100 BaseT, 10/100/1000 BaseT (CM40 and CM44).
If you are still unable to find the right model for your project, try looking at the MRP Horizontal units (a step up) or maybe the MDP Horizontal units (a step down).
The Modular Rebootable Power (MRP) Series provides outlet level control and Branch Circuit Metering.
This strip does not have metered outlet but it does have outlet control.
Vertical MRPs – ZeroU
Below are 3 lists of our Vertical standard offerings by interface capability in order from No IP (CM31) to Direct IPv4/v6; 10/100 BaseT (CM42) to Direct IPv4/v6; 10/100 BaseT, 10/100/1000 BaseT (CM40).
If you are still unable to find the right model for your project, try looking at the MMP Vertical units (a step up) or maybe the MSP Vertical units (a step down).
Horizontal MRPs – Rackmount
Below are 3 lists of our horizontal standard offerings by interface capability in order from No IP (CM31 and CM33) to Direct IPv4/v6; 10/100 BaseT (CM42 and CM45) to Direct IPv4/v6; 10/100 BaseT, 10/100/1000 BaseT (CM40 and CM44).
If you are still unable to find the right model for your project, try looking at the MMP Horizontal units (a step up) or maybe the MSP Horizontal units (a step down).
Our most dense series with the most control and data points
Provides metered outlet and outlet control (Also available without the outlet control
Metering includes AMPs, Voltage, Active and Apparent Power, and Power Factor
Maintains a kWh meter for each outlet
Thousands of models to choose from
Continue reading “MMP Series”
Toll Free:800.523.2702 
International: